Page 3 - 2024_Q1_OmegaLink_Catalog

OL-RS-BA MODULE AND

CONNECTOR LAYOUT

• FULLY INTEGRATED ON-BOARD DUAL OL-MDB-ALL • OEM STYLE ALARM (NEG. HORN OUTPUT)
DATA INTERFACE (NO EXTERNAL BYPASS REQUIRED) • ZONE PROTECTION – HOOD, TRUNK, DOORS, IGNITION
• FULL ANALOG / DIGITAL SYSTEM - INCLUDES • POSITIVE 12-VOLT SIREN OUTPUT
LOW CURRENT HARNESS (OPTIONAL
OLADSAHRPWR HIGH CURRENT HARNESS) • NEGATIVE HORN-HONK OUTPUT
• OMEGA & EXCALIBUR RF-KIT & LINKR TELEMATICS READY • ON-BOARD TILT SENSOR
• T-HARNESS COMPATIBLE • OPTIONAL FULL SECURITY BY ADDING ANY
OMEGA SENSOR AND/OR SIREN:
• WORKS ON AUTOMATIC TRANSMISSION VEHICLES ONLY
(SEE P10 FOR MANUAL TRANSMISSION T-HARNESS OPTIONS ) • NO ACTIVATION CODE REQUIRED FOR SECURITY–
INCLUDED IN ALL BA FIRMWARES
• BUILT-IN TEMPERATURE SENSOR
CONNECTOR LAYOUT

VEHICLE CONNECTOR 1
(BLACK 20 PIN)
• BYPASS / INTERFACE I/O VEHICLE CONNECTOR 2
(CAN-1, CAN-2, FT-CAN, SWC, JI850 ISO, UBP, MUX, DATA) (BLACK 6 PIN)
• T-HARNESS • BYPASS / INTERFACE I/O (CAN-3)
• LOW CURRENT IGNITION HARNESS
RELAY CONNECTOR (IGN/ACC/SST/12DC/GND) This secondary vehicle connector is
used for advanced vehicle integra-
In some application relays are required This connector is used to integrate into vehicle power and tion including CAN 3 when needed.
for proper integration. These on-board data. This connector includes low current input/output. Programming Button: The programming
relays are auto-configured making These Low Current wires are auto-configured by vehicle button is used for software and tach
installation simple. meaning we make installation safe and foolproof. programming.

PROGRAMMING BUTTON:
Used to program the OL-RS-BA firm-
ware to the vehicle and perform system
reset when needed.
HIGH CURRENT MAIN
IGNITION RELAY OUTPUT
CONNECTOR
The on-board High Current
Relays can be used to provide
power when a low current CONNECTORS - FUTURE
install is not safe. These relays
are auto configured for each UNUSED (BLACK 6 PIN)
vehicle application making
programing simple.
UNUSED (BLACK 5 PIN)

UNUSED (RED 4 PIN)

AT/MT LOOP
This loop it used to tell the mod-
ule what type of transmission OMEGA RF-KIT / WEBLINK
the remote start is installed on. CONNECTOR (BLACK 4 PIN)
This works in conjunction with
our state of the art software to This connector plugs directly into any
guarantee remote start safety Omega Excalibur RF-KIT, and is also
with tamper proof security. used as the weblink connector to flash
Currently only compatible with and update the OLRSBA using a PC with
automatic transmissions. the OL-LOADER or a Weblink Mobile for
iPhone and Android.

ACC/TELEMATICS CONNECTOR
INPUT/OUTPUT CONNECTORS SHOCK SENSOR CONNECTOR (YELLOW 4 PIN) LINKR TELEMATICS CONNECTOR
These connectors are when vehicle in- The OL-RS-BA has an on-board Tilt This Accessory connector is used to add (BLUE 4 PIN)
formation cannot be provided via data. Sensor for motion detection. Separate- any compatble data driven accessory like This Connector is used to add a Linkr unit, to
This provides the option of using this ly, this connector can be used to add our AU-84TDP data shock sensor. Can also provide smart-phone control from anywhere
system completely analog, expanding any external Omega Sensor. be used for telematics! in the world you have cellular service.
vehicle applications into the 1,000s.
3
VISIT WWW.WIRESHEET.COM FOR THE LATEST VEHICLE COMPATIBILITY! 3